LinSig 3 Update Installation

Obtaining LinSig Updates

If you have not already done so download the latest update of LinSig from the Software Updates page. This download can be used both to install a completely new copy of LinSig or to update an existing copy of LinSig to the latest version.

Installing a New LinSig Installation

The downloaded update package can be used to install a new copy of LinSig. After LinSig has been installed it will function as a limited demonstration copy until activated as described below.

To install a new installation of LinSig:

1. Ensure you are logged in with sufficient administrative privileges.
2. Extract the update file LinSigV3xxxx.exe from the downloaded ZIP file and save it anywhere on your hard disk.
3. Double Click on the LinSigV3xxxx.exe file in the location you saved it to above.
4. Follow the on screen prompts to install LinSig.

LinSig should now have been installed but will only operate as a demonstration copy until activated.

Instructions for activating the LinSig software can be found here:

Activating the LinSig software

Updating an Existing Copy of LinSig 3

An existing version of LinSig3 can be updated as follows:

1. Ensure you are logged in with sufficient administrative privileges.
2. Extract the update file LinSigV3xxxx.exe from the downloaded ZIP file and save it anywhere on your hard disk.
3. Double Click on the LinSigV3xxxx.exe file in the location you saved it to above.
4. Follow the on screen prompts to update LinSig.
5. After installation is complete open LinSig and check the version number using 'About LinSig...' from the LinSig Help menu, to ensure that the new version has installed correctly.

Please note that:

• Each update includes all previous updates and only the latest update needs to be installed.
• After installing the update existing activated copies of LinSig do not normally require reactivating.

• Return to Software Update Downloads Page